Container welding machine
Process sequence
We create complete production lines for a wide variety of companies, such as companies in the drink industry. These machines and systems are used to produce containers and steel or stainless steel tanks,for instance. We handled project management, development, production, installation, and commissioning.
The spectrum of customer requests we receive ranges from manual to fully automated production solutions, even allowing unmanned production if necessary. Other machine requirements include scalable series production, variable shapes, and high pressure containers or containers built with differing volumes.
Machine overview
Click on the machine to learn more
Burst point milling machine single system – semi-automated 
Technical Data
Customer-specific bending machine for shaping head and foot rings.
- Sheet width: Up to approx. 150 mm
- Sheet thickness: max. 2 mm
- Tensile strength: max. 1,200 N/mm²
- Roller diameter: 104 mm (bending roller)
- Roller length: 360 mm
- Swipe speed: 13.8 m/min
- Machine weight: 600 kg
Video
Technical Data
This welding machine welds rolled rings with widths between 80 mm - 160 mm and diameters between 233 mm and 400 mm in packages of four. The machine uses WIG welding without a supplementary wire.
- Workpiece diameter: Rings from 220 to 400 mm
- Workpiece width: max. 160 mm
- Welded seam: Full longitudinal seam on ring package, length max. 640 mm
- Material thickness: 0.5 to 2.5 mm
- No lock is required due to the machine's stability.
- All machining combinations are available and can be combined to create recipes.
- Automatic sheet detection via laser probe.
Video
Technical Data
The head and foot ring welding machine is used to weld thermoformed container halves with head or foot rings using WIG welding without a supplementary wire. The machines are fitted manually with workpieces, and the welding process is automatically controlled. A laser seam tracking system is used to ensure the correct welded seam length. The machine can be fitted for different container types in diameters between 200 mm - 400 mm.
- Workpiece diameter: 220 to 400 mm
- Workpiece height: max. 600 mm
- Welded seams: Round seam – WIG
- Material: Stainless steel 1.4301
- Material thickness Shell: 0.8 to 1.7 mm
- Material thickness ring: 1.5 to 2.4 mm
- Weight: 2,500 kg
Video
Technical Data
The center seam welding machine is designed for circumferential welding of two halves of a stainless steel container (the top and bottom sections) on the center seam using WIG welding. The machines are fitted manually with workpieces, and the welding process is automatically controlled. The machine can be fitted for different container types in diameters between 200 mm - 400 mm.
- Workpiece diameter: 220 to 400 mm
- Workpiece height: max. 600 mm
- Welded seams: Center seam, WIG welding
- Material thicknesses: 0.8 to 1.7 mm
- Weight: approx. 2,500 kg
- Bezel swivel movements via electric drive.
- Servo-electric carriage feed motions with recipe-managed setting positions.
- No adjustment of internal root protection mechanism required.
Video
Technical Data
The burst point milling machine is designed to mill bursting marks on the bottom sections of stainless steel containers. The milling position is pre-defined and adjusted to the different container types.
- Workpiece diameter: max. 395 mm
- Workpiece height: max. 271 mm
- Material: Stainless steel 1.4301
- Tensile strength: 2
- Material thicknesses: 0.97 to 1.67 mm
- Positioning precision: +/- 0.01 mm
Video
Technical Data
The circumferential weld brushing machine is used to brush over the circumferential welded seams on stainless steel containers.
- Workpiece diameter: max. 395 mm
- Workpiece height: max. 600 mm
- Welded seams: max. 3 pieces
- Material: Stainless steel 1.4301
- Weight: 2 to 20 kg
Video
Technical Data
- Length (with safety guard) 6,900 mm
- Width (with safety guard) 6,700 mm
- Total height 14.75 m
- Total weight 42 t
- Workpiece diameter 1,600 to 2,000 mm
- Total workpiece height min. 200 / max. 7,500 mm
- Welded seams Butt welds and fillet welds
- Material thickness max. 5 mm
- Weight max. (incl. suspension / attachment equipment) 1,600 kg
Video
Technical Data
- Width 2,030 mm
- Height 2,450 mm
- Depth 1,665 mm
- Total weight 800 kg
- Workpiece diameter min. 230 mm
- Workpiece diameter max. 400 mm
- Container height min. 250 mm
- Container height max. 640 mm
- Material Stainless steel
- Compressed air 12 bar
Video
Technical Data
- Width 2,120 mm
- Total height 3,520 mm
- Length 1,700 mm
- Total weight (without water) 2,150 kg
- Workpiece diameter min. 230 mm
- Workpiece diameter max. 395 mm
- Workpiece height min. 230 mm
- Workpiece height max. 620 mm
- Material 1.4301/1.4401